---

cisco_ios:
  base_prompt: pynet-rtr1
  router_prompt : pynet-rtr1>
  enable_prompt: pynet-rtr1#
  interface_ip: 10.220.88.20
  version_banner: "Cisco IOS Software"
  multiple_line_output: "Configuration register is"
  file_check_cmd: "logging buffered 8880"

juniper:
  base_prompt: pyclass@pynet-jnpr-srx1
  router_prompt: pyclass@pynet-jnpr-srx1>
  enable_prompt: pyclass@pynet-jnpr-srx1#
  interface_ip: 10.220.88.39
  version_banner: 'JUNOS Software Release'
  multiple_line_output: 'security-zone untrust'
  cmd_response_init: 'archive size 110k files 3'
  cmd_response_final: 'archive size 120k files 3'
  commit_comment: 'Unit test on commit with comment'

paloalto_panos:
  base_prompt: ntc@pa1
  router_prompt: ntc@pa1>
  enable_prompt: ntc@pa1>
  interface_ip: '10.0.0.90'
  multiple_line_output: 'logdb-version: 7.0.9'
  version_banner: 'sw-version: 7.0.1'
  cmd_response_init: 'new_test'
  cmd_response_final: 'another_test'

brocade_fastiron:
  base_prompt: SSH@ICX7250-24P Router
  router_prompt : SSH@ICX7250-24P Router>
  enable_prompt: SSH@ICX7250-24P Router#
  interface_ip: 10.18.253.130
  version_banner: "SW: Version"
  multiple_line_output: "interface management 1"
  file_check_cmd: "logging buffered 3000"

brocade_netiron:
  base_prompt: SSH@MLXe
  router_prompt : SSH@MLXe>
  enable_prompt: SSH@MLXe#
  interface_ip: 10.254.4.128
  version_banner: "IronWare : Version"
  multiple_line_output: "All show version done"
  file_check_cmd: "logging buffered 3000"

brocade_nos:
  base_prompt: Leaf1
  router_prompt : Leaf1#
  enable_prompt: Leaf1#
  interface_ip: 10.254.4.117
  version_banner: "Network Operating System Version:"
  multiple_line_output: "TenGigabitEthernet 34/0/48"
  cmd_response_init: 'logging raslog console WARNING'
  cmd_response_final: 'logging raslog console INFO'

aruba_os:
  base_prompt: "(ARUBA-MASTER) "
  router_prompt: "(ARUBA-MASTER) >"
  enable_prompt: "(ARUBA-MASTER) #"
  interface_ip: 10.1.200.242
  version_banner: "Aruba Operating System Software."
  multiple_line_output: "Supervisor Card"
  cmd_response_init: "location1"
  cmd_response_final: "location2"

ubiquiti_edge:
  base_prompt: "(UBNT EdgeSwitch) "
  router_prompt: "(UBNT EdgeSwitch) >"
  enable_prompt: "(UBNT EdgeSwitch) #"
  interface_ip: 172.16.51.102
  version_banner: "Software Version"
  multiple_line_output: "Current Configuration:"
  cmd_response_init: ""
  cmd_response_final: "logging persistent 4"

dell_powerconnect:
  base_prompt: myswitch
  router_prompt : myswitch#
  enable_prompt: myswitch#
  interface_ip: 192.168.1.254
  version_banner: "SW version"
  multiple_line_output: "Gigabit Ethernet Ports"
  cmd_response_init: "logging buffered 400"
  cmd_response_final: "logging file warnings"

pluribus:
  base_prompt: "CLI (mircea@sw05.bjm01) "
  router_prompt: "CLI (mircea@sw05.bjm01) "
  enable_prompt: "CLI (mircea@sw05.bjm01) >"
  interface_ip: ";mircea;fabric;70000;;cftac;"
  multiple_line_output: "chassis-serial"
  version_banner: "bjm;::;a0000bd:52b35878;0;;13068;"

alcatel_aos:
  base_prompt: "ale-lab-3"
  router_prompt : "ale-lab-3>"
  enable_prompt: "ale-lab-3>"
  interface_ip: 192.168.1.154
  version_banner: "Alcatel-Lucent OS6250-24 6.7.1.108.R04 Service Release, January 04, 2017"
  multiple_line_output: "FC - ForcedCopper PC - PreferredCopper C - Copper"