| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105 |
- ---
- cisco_ios:
- base_prompt: pynet-rtr1
- router_prompt : pynet-rtr1>
- enable_prompt: pynet-rtr1#
- interface_ip: 10.220.88.20
- version_banner: "Cisco IOS Software"
- multiple_line_output: "Configuration register is"
- file_check_cmd: "logging buffered 8880"
- juniper:
- base_prompt: pyclass@pynet-jnpr-srx1
- router_prompt: pyclass@pynet-jnpr-srx1>
- enable_prompt: pyclass@pynet-jnpr-srx1#
- interface_ip: 10.220.88.39
- version_banner: 'JUNOS Software Release'
- multiple_line_output: 'security-zone untrust'
- cmd_response_init: 'archive size 110k files 3'
- cmd_response_final: 'archive size 120k files 3'
- commit_comment: 'Unit test on commit with comment'
- paloalto_panos:
- base_prompt: ntc@pa1
- router_prompt: ntc@pa1>
- enable_prompt: ntc@pa1>
- interface_ip: '10.0.0.90'
- multiple_line_output: 'logdb-version: 7.0.9'
- version_banner: 'sw-version: 7.0.1'
- cmd_response_init: 'new_test'
- cmd_response_final: 'another_test'
- brocade_fastiron:
- base_prompt: SSH@ICX7250-24P Router
- router_prompt : SSH@ICX7250-24P Router>
- enable_prompt: SSH@ICX7250-24P Router#
- interface_ip: 10.18.253.130
- version_banner: "SW: Version"
- multiple_line_output: "interface management 1"
- file_check_cmd: "logging buffered 3000"
- brocade_netiron:
- base_prompt: SSH@MLXe
- router_prompt : SSH@MLXe>
- enable_prompt: SSH@MLXe#
- interface_ip: 10.254.4.128
- version_banner: "IronWare : Version"
- multiple_line_output: "All show version done"
- file_check_cmd: "logging buffered 3000"
- brocade_nos:
- base_prompt: Leaf1
- router_prompt : Leaf1#
- enable_prompt: Leaf1#
- interface_ip: 10.254.4.117
- version_banner: "Network Operating System Version:"
- multiple_line_output: "TenGigabitEthernet 34/0/48"
- cmd_response_init: 'logging raslog console WARNING'
- cmd_response_final: 'logging raslog console INFO'
- aruba_os:
- base_prompt: "(ARUBA-MASTER) "
- router_prompt: "(ARUBA-MASTER) >"
- enable_prompt: "(ARUBA-MASTER) #"
- interface_ip: 10.1.200.242
- version_banner: "Aruba Operating System Software."
- multiple_line_output: "Supervisor Card"
- cmd_response_init: "location1"
- cmd_response_final: "location2"
- ubiquiti_edge:
- base_prompt: "(UBNT EdgeSwitch) "
- router_prompt: "(UBNT EdgeSwitch) >"
- enable_prompt: "(UBNT EdgeSwitch) #"
- interface_ip: 172.16.51.102
- version_banner: "Software Version"
- multiple_line_output: "Current Configuration:"
- cmd_response_init: ""
- cmd_response_final: "logging persistent 4"
- dell_powerconnect:
- base_prompt: myswitch
- router_prompt : myswitch#
- enable_prompt: myswitch#
- interface_ip: 192.168.1.254
- version_banner: "SW version"
- multiple_line_output: "Gigabit Ethernet Ports"
- cmd_response_init: "logging buffered 400"
- cmd_response_final: "logging file warnings"
- pluribus:
- base_prompt: "CLI (mircea@sw05.bjm01) "
- router_prompt: "CLI (mircea@sw05.bjm01) "
- enable_prompt: "CLI (mircea@sw05.bjm01) >"
- interface_ip: ";mircea;fabric;70000;;cftac;"
- multiple_line_output: "chassis-serial"
- version_banner: "bjm;::;a0000bd:52b35878;0;;13068;"
- alcatel_aos:
- base_prompt: "ale-lab-3"
- router_prompt : "ale-lab-3>"
- enable_prompt: "ale-lab-3>"
- interface_ip: 192.168.1.154
- version_banner: "Alcatel-Lucent OS6250-24 6.7.1.108.R04 Service Release, January 04, 2017"
- multiple_line_output: "FC - ForcedCopper PC - PreferredCopper C - Copper"
|
